Huble deployment please help

[Stannny]

Hello guys,

I am having problems with Huble deployment, the shoulder and the elbow of RMS won't move at all. Only the Effector is moving. I am using Saitek 290 PRO Flight Controller but nevertheless - tried pushin arrow keys on the keyboard with no avail. RMS stays on and only Effector is active.

[CapitanPiluso]

Hi Stanny,have you pushed the RMS switch ?
99% of your ( and everybody s )  doubts have certainly been answered in these forums,a little of search will help.
Regards.

[Stannny]

RMS switch? Which panel is it located in?

The RMS is moving up and down, but it is impossible to yaw it (both with flight controller yaw twist and with Insert/Delete keys), impossible to angle the elbow. I cannot grab the Hubble without yaw of the RMS and adjusting the angle of arm elbow.

[sneezedr424]

The keys for the RMS are simple: - and + control the elbow, 9 and 3 control the shoulder, / and * control yaw, and then there are the end effector controls: 8 and 2 are pitch, 0 and . (or your insert and delete keys) are yaw, and 4 and 6 are roll. i hope you find this helpful!

Sneeze