Community
On Orbit => Space Shuttle Mission Simulator (tm) => Topic started by: Zac on January 09, 2023, 09:30:54 AM
-
So after ground control opens up the solar array for hubble, it does this without the payload doors opening?
I'm stuck at this part with the coms:
RELEASE THE HUBBLE
AFT RIGHT CHECK END DEFLECTOR TO AUTO
UNGRAPPPLE AND REALESE HUBBLE
WHEN END DEFLECTOR......
I dont know what to do next, I have it on the easiest mode where it shows what switches to press, but this time its showing nothing?
-
Hello sir!
If Hubble solar panels deployed before you opened the payload bay doors there must be a timing issue somewhere. It usually mean you have taken to long doing a specific task.
Its easier to provide support if you submit the comms.number. It is visible at the bottom of the info window, below mission time.
ADMIN
-
If the problem is that you have to let go of Hubble and don't know how, press 5 on your numpad to release HST. Otherwise, as Admin said, providing the comm. number you're stuck at would help :)
-
Ok thank you everyone, Not sure how I could have had a timing issue? as I always have to do the tasks before I can move on?