« previous next »
Pages: [1]

Author Topic: OPS 301  (Read 3649 times)

Snake762

  • Just joined training
  • *
  • Posts: 16
OPS 301
« on: January 08, 2008, 02:20:55 PM »
 During deorbit phase everytime I enter OPS 301 PRO I burn up, is this a bug or ami doing something wrong? Any suggestions please.
Logged

christra

  • Guest
Re: OPS 301
« Reply #1 on: January 08, 2008, 04:38:30 PM »
301 is not the end of the deorbit preparations. It's followed by 302, 303, 304. And THEN you should be in good shape for reentry.
Logged

Slaintemaith

  • Guest
Re: OPS 301
« Reply #2 on: January 08, 2008, 09:22:30 PM »
Nope.  I'm following all those procedures as well, and am still burning up miserably.
Logged

Becker07

  • Astronaut
  • ***
  • Posts: 170
  • ... my purpose holds to sail beyond the sunset ...
Re: OPS 301
« Reply #3 on: January 08, 2008, 09:52:27 PM »
Taking a guess here but it sounds like you are not aligning the shuttle correctly. After the deorbit burn there is a stage after (OPS 303 PRO I think) when you have to orientate the shuttle for reentry. You only need to pitch the shuttle until Pitch reads 281. This clears that message and you proceed into  hydraulics checks. Make sure you let that cycle complete. Other than that I can't think of what else might be causing your burn ups.
Logged
Pages: [1]
« previous next »