Author Topic: Stuck in STS-31  (Read 3053 times)

Zac

  • Just joined training
  • *
  • Posts: 9
Stuck in STS-31
« on: January 09, 2023, 09:30:54 AM »
So after ground control opens up the solar array for hubble, it does this without the payload doors opening?

I'm stuck at this part with the coms:
RELEASE THE HUBBLE
AFT RIGHT CHECK END DEFLECTOR TO AUTO
UNGRAPPPLE AND REALESE HUBBLE
WHEN END DEFLECTOR......

I dont know what to do next, I have it on the easiest mode where it shows what switches to press, but this time its showing nothing?

Admin

  • Commander
  • Shuttle Pilot
  • *****
  • Posts: 4,730
  • Sic Itur Ad Astra
    • Space Shuttle Mission 2007 (tm)
Re: Stuck in STS-31
« Reply #1 on: January 10, 2023, 06:10:23 PM »
Hello sir!

If Hubble solar panels deployed before you opened the payload bay doors there must be a timing issue somewhere. It usually mean you have taken to long doing a specific task.

Its easier to provide support if you submit the comms.number. It is visible at the bottom of the info window, below mission time.


ADMIN
- The Space Shuttle Mission 2007(tm)Team -

Pappolus

  • Astronaut
  • ***
  • Posts: 133
  • Ad Astra Per Aspera
Re: Stuck in STS-31
« Reply #2 on: January 11, 2023, 06:08:06 AM »
If the problem is that you have to let go of Hubble and don't know how, press 5 on your numpad to release HST. Otherwise, as Admin said, providing the comm. number you're stuck at would help :)
Discovery, go with throttle up

Zac

  • Just joined training
  • *
  • Posts: 9
Re: Stuck in STS-31
« Reply #3 on: January 11, 2023, 10:50:40 AM »
Ok thank you everyone, Not sure how I could have had a timing issue? as I always have to do the tasks before I can move on?